F.11
DUPLEX 340/420/620
1.0
100
5
4
3
2
1
RTMU
6.2 STARTING THE APPLIANCE
1) Make sure that the handle is in the rest position (perfectly vertical) and that the regulator
is in the “Transport” position (REST TRASLATION).
2) Plug the cable into an earthed socket.
3) Place the regulator to one of the four available positions according to the type of
cleaning to be carried out.
(MU= Mop-Up : Insertion of dirt collector)
1 Heavy duty wash for very dirty floors.
2 Delicate wash for all types of floors.
3 Normal carpets and wooden floors.
4 Long-pile carpets.
5 Transport position / disable appliance (REST TRASLATION)
CAUTION
To clean the carpet, it is recommended to use the yellow brushes,
which have been specifically designed to clean rugs and carpets.
Rev.
ASSEMBLING THE APPLIANCE
EN
To Next Page
Loading...