17
6. OPERATING
e Turn the jog dial to select “Booklet”.
NOTE :
Even when you have selected
“Booklet”, the paper will only be
folded (not stapled) if you select “1”
in step 3.
If the “Through” is selected, the
paper is ejected without being
processed.
The paper size cannot be changed in
the “Through” mode. Therefore
before using the “Through” mode,
change to the desired paper size in
output modes other than the
“Through” mode.
To cancel the setting
Instead of going on to step r, press the (Escape)
button to return to step q.
Select Mode
Booklet Side ST
The selected output mode shifts
to the beginning of the line and
starts blinking.
r Press the center of the jog dial to confirm the
selection in step e.
NOTE : If the paper size set when selecting the
output mode is not suitable for the
output mode, priority will be given to
the output mode, and the paper size
will automatically be changed to a
suitable size.
Output Mode
Booklet
Set the paper size to be processed.
q Turn the jog dial to display “Paper Size” in the
display.
2
Paper Size
A3
w Press the center of the jog dial.
Select P. Size
A3 A4 A5 B4 B5
The paper size displayed in
the second line is currently
selected.
To Next Page
Loading...
Need help?
General
