2
11
Preparation Before Use
Before Using This Machine
1
Set the
back guide
according to the document size.
If too many documents are loaded and the
feed
tray
is at a low position, the
back guide
does not
reach the documents.
In this case, use the
guide
.
Set the
side guide
according to the document size.
If double feed occurs when using light weight
documents, adjust the
document holder
according
to the documents.
REFERENCE
REFERENCE
Align the documents fi rst and then set the
side
guide
. When the alignment of the documents is
poor, they cannot not be fed properly.
IMPORTANT
Documents
Back guide
Side guide
Document holder
Guide
To Next Page
Loading...
General