83
3
Basic Operations
$GMXVWࠉࠉࠉ&87
&XWWHU6SHHG
6(7
6/2:
)$67
6WDQGDUG
2WKHUV
&87
Adjust
REFERENCE
5HWULHYH-2%
(QWHU-2%
$GMXVW
3URFHVV
6\VWHP
(QYLURPHQW
&2817
6+76
-
+
Make sure that the
standby
screen is displayed on
the touch panel.
Touch
Adjust
.
Adjust − Slot 2
When the
cutter module
is installed in
slot 2
.
Cutter Speed
: Select cutter speed from
FAST
or
SLOW
.
You cannot select cutter speed when the
creaser
module
or the
CPM module
are installed.
Speed
This is used to select processing speed.
Apply Shrinkage
In case printed documents are shrunk or expanded by heat generated on digital printer, by
entering the original document size and the document size after they are shrunk/expanded,
the DC-516 automatically calculates the shrinkage/expansion ratio and adjusts the creasing
position accordingly.
This function is also effective when fi nished documents are shrunk or expanded due to
document types or document surface status.
This function compensates for the shrinkage or expansion in the feed direction.
Adjust All
This corrects the document position in a vertical direction against the JOB set.
Last cut adj.
This corrects the trail cut position of the last fi nished product in a direction against the JOB set.
Cutter Speed
This is used to select cutter speed.
The default is
FAST
.
To Next Page
Loading...
General