Duplo DC-535 User Manual

- 12 -
3. Procedures for using the machine
6.
Fit the paper stopper to the paper tray, so that it rests
against the trailing edge of the paper.
7.
Fit the No. 1 paper retainer into the gap between the
stopper's prongs, so that it holds down the paper.
1.
Fit the No. 2 paper retainers (accessories) into the gap
between the paper guides' prongs.
S If the paper is laminated, or curls to a large degree:
• Be sure to use the No. 2 paper retainer accessories if
the paper curls to a large degree. Otherwise the paper
will not be fed properly.
IMPORTANT
Paper
stopper
No.1
Paper
retainer
No.2 Paper retainer
Adjust the paper thickness5
1.
Open the front safety cover.
Front safety cover

Duplo DC-535 Specifications

General

Brand	Duplo
Model	DC-535
Category	Cutter
Language	English