2-8
Chapter 2 BASIC OPERATION
Folding paper into two
Because the second folding plate is not used for a single fold, move the rough adjustment knob of
the second folding plate to the upper end in the following methods.
Rough
adjustment knob
1) Slide the rough adjustment knob of the sec-
ond folding plate up to the upper end while
lifting it up.
Fine adjustment knob
2) Turn the ne adjustment knob to the left un-
til the rough adjustment knob reaches the
upper end.
15 mm/
0.59 inch
● When the rough adjustment knob
has not reached the upper end, thin
paper may get a crease at around 15
mm/0.59 inch from the folded line.
● Rotating the ne adjustment knob
excessively will result in paper jam-
ming, improper folding, and other me-
chanical malfunctions.
To Next Page
Loading...
Need help?
General
