2-7
Chapter 2 BASIC OPERATION
Test folded sample
11
Check the nish of test folding.
Check for folding misalignment using the
second test folded sample.
If folding misalignments occur, refer to
Chapter 3 "ADVANCED OPERATION"“5.
Correcting Folding Misalignment”
( p.3-27).
Clear button
12
After completing adjustments, press
the C (clear) button for more than
two seconds to clear the counter to
"0."
13
Press the Start button to start folding
operations.
Press the Stop button to interrupt or stop
the operations. Pressing the Start button
again will resume operations.
When there is no paper on the paper feed
table, the machine will stop automatically
and the counted number and "NO PAPER"
will be displayed alternately.
When paper is loaded on the paper feed
table, only the counted number will be dis-
played. If you press the C button for more
than two seconds, the counter returns to
"0." If you press the Start button without
pressing the C button, folding operations
will resume and the accumulated number
will be displayed on the counter.
Note that you cannot move onto the next
procedure until you place paper on the
paper feed table.
To Next Page
Loading...
Need help?
General
