DocuCutter 545
Safety Notes
The DocuCutter DC-545 has been designed and tested to
meet strict safety requirements. These include safety
agency examination and approval, and compliance to
established environmental standards. The following notes
and warnings will help to ensure your complete
understanding of the safety requirements for the
DocuCutter DC-545:
• ALWAYS follow all warnings and instructions marked
on, or supplied with, the equipment.
• ALWAYS disconnect the machine from the wall outlet
before cleaning.
• ALWAYS use the materials and supplies specifically
designed for this machine. Use of unsuitable materials
may result in poor performance and possibly create a
hazardous situation.
• ALWAYS ensure that the machine is located on a solid
support surface with adequate strength for the weight of
the machine.
• NEVER use any supplies or cleaning materials for
purposes other than what they were intended.
• NEVER push objects of any kind into the slots of the
machine as they may touch dangerous voltage points or
cause a short circuit in parts that could result in a risk of
fire or electric shock.
• NEVER push objects of any kind into the ventilation
openings in the back and bottom of the machine.
• NEVER allow anything to rest on the power cord.
• NEVER use a ground adapter plug to connect the copier
to a power source receptacle that lacks a ground
connection terminal.
• ALWAYS make sure that the total amperage of all
products plugged into the wall outlet does not exceed
the outlet protection.
10 DocuCutter 545 Training Guide © 2002, Duplo USA Corporation
To Next Page
Loading...
Need help?
General
