34
Print Speed Adjustment
Print Speed Adjustment
How to Adjust Print Speed
Press the LOW (left cursor) or HIGH (right cursor)
key to adjust the speed.
Press the HIGH key to decelerate printing.
The speed lamp moves to the right.
Press the LOW key to accelerate printing.
The speed lamp moves to the left.
● To return to default setting (about 100 pages per minute):
●
Press the LOW or HIGH key repeatedly until the speed lamp
moves to the center.
●
After pressing the STOP key, press the RESET key.
In this case, all settings are reset to Standard Mode.
However, when default settings have been changed in Initial
Confi guration setting, the print speed is the currently set print
speed.
Print speed can be adjusted in 5 steps between 45 pages per minute and 130 pages per
minute, and TOP speed (150 sheets per minute). The default setting when the power is turned
ON is about 100 pages per minute (standard speed). However, when default settings have
been changed in Initial Confi guration setting, the print speed is currently set print speed.
RESTRICTIONS in TOP SPEED
Use size B4 or smaller.
Paper stacking performance may deteriorate when using thin paper.
Print position performance may deteriorate slightly.
Some paper may cause wrinkles.
● Paper jam may occur more frequently and the paper stacking may deteriorate at high and
low speeds with certain types of paper and with certain image. Use the LOW or HIGH key
to select the optimum print speed.
● You can adjust the print speed while the machine is printing.
IMPORTANT
REFERENCE
REFERENCE
V3M0225
V3M0226
V3M0227
To Next Page
Loading...
Need help?
General