1 General
D−LX 200, D−LX 720 11
Electrostatically
endangered
components (ESD)
Other symbols used
Apart from the warning notices and safety instructions, the following general
instructions and associated pictograms are used to draw particularly important
information to your attention:
Before starting any work, please read the Operating instructions!
Instructions relating to environmental protection
Information marked in this way is only relevant if the optionally available
software (→) D−LX 200 InformationCentre is installed to the system
configuration. The D−LX 200 can be operated without using this software.
Disposal instructions; the product is not to be treated as normal domestic
waste, must be disposed of as special waste in line with local regulations.
Explicitly marked paragraphs relate only to versions of the device in Ex-
version.
Explicitly identified paragraphs only refer to the specified device variant. All
other information applies for both device variants.
Paragraphs marked in this way give information on permitted ATEX zones of
the described devices in Ex-version.
This DIP switch is OFF
This DIP switch is ON
To Next Page
Loading...
Need help?
General
