1 General
12 D−LX 200, D−LX 720
A (→) indicates that the following term is explained in the glossary.
×
A
×
in a list indicates that something must not be done or that something is
not suitable.
Unless otherwise stated, all measurements are in mm
This Operating instructions are also available in PDF format.
1.3 Limitation of liability
All information and instructions in this manual have been compiled on the
basis of the applicable standards and regulations, current technology and
many years of knowledge and experience.
The manufacturer accepts no liability for damages arising from:
Disregard of the Operating instructions
Incorrect use
Use of unauthorised personnel (see Chapter 2.7 from page 20)
Unauthorised modifications
Technical changes
Use of unapproved spare parts
Use of defective and/or improperly repaired devices
Furthermore, the obligations agreed in the contract of sale, the general
conditions of business ("Conditions of supply for goods and services in the
electrical industry" (ZVEI)) and the manufacturer's Conditions of Supply,
together with the statutory regulations in force at the date of signing the
contract are all applicable.
1.4 Information regarding warranty
The terms of the warranty can be found as a separate document in the
General Terms and Conditions of Business.
Modifications and changes to the Compact Flame Monitor are not permitted.
Any tampering with the device will render the warranty null and void.
Fault-free and safe operation of the device depends on appropriate
transportation, correct storage, installation and assembly as well as careful
operation.
1.5 Spare parts
Danger of injury from incorrect spare parts!
Incorrect or defective spare parts can lead to damage, malfunctions or total
failure and may also impair safety.
Only use genuine spare parts supplied by the manufacturer.
Spare parts can be obtained from an authorised agent or directly from the
manufacturer.
For the manufacturer's address, see page 2.
To Next Page
Loading...
Need help?
General
