16 | 7.7 Sleep Mode
DuraLabel.com | 800.788.5572
ADVANCED FUNCTIONS
7.6.1 WINDOWS SYSTEMS
• Click the hard drive icon on the Toro toolbar.
• Browse to the folder C:\GraphicProducts\BackUp\DLP Templates and Symbols.
• Drag and drop the template file to the same folder as the modified copy in
C:\Documents and Settings\Default User\My Documents\DLP Templates and
Symbols.
• Click OK at the prompt to overwrite the edited template with the original.
7.6.2 LINUX SYSTEMS
• Double-click on the DATA icon on the desktop.
• Navigate to /home/dltoro/Desktop/DATA/Backup/DLP Templates and Symbols.
• Drag and drop the template file to the same folder as the modified copy in /home/
dltoro/Documents/DuraLabel Templates/DLP Templates and Symbols.
• Click Replace at the prompt to overwrite the edited template with the original.
An entire template folder may be recovered using the same procedure.
7.7 Sleep Mode
In sleep mode, user data is saved to memory and the Toro appears to be off. The power
indicator light will slowly blink green. To leave sleep mode, press any key, such as the
spacebar.
7.7.1 WINDOWS SYSTEMS
To enable sleep mode, select the Programs menu from the taskbar, highlight Control
Panel, highlight All Settings, and choose Power Options. Select the Power Schemes tab
from the Power Options window that appears, and select the desired time in the System
standby box. Your selection will be implemented the next time Toro starts up.
7.7.2 LINUX SYSTEMS
To enable sleep mode, select the Programs menu from the taskbar, highlight Control
panel, highlight All Settings, and choose Power Options. Select the On AC Power tab
from the Power Options window that appears, and choose “Put computer to sleep when
inactive...”; then, choose the desired wait time.
To Next Page
Loading...
