DuraLabel Toro - 13 Certifications

DuraLabel.com | 800.788.5572 13. Certications | 27
13. Certications
FCC Compliance - This equipment has been tested and found to comply with the limits
for a CLASS A digital device, pursuant to Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy,
and if not installed and used in accordance with instructions may cause harmful
interference to radio communications. Changes and modifications could void the user’s
authority to operate this equipment.
Toro conforms to the following US, Canadian and European EMC and EMI standards -
This equipment has been tested and passed with the requirements relating to
electromagnetic compliance based on the standards EN 55022: 2006 (Amended
by A1:2007), CISPR 22:2005 (Amended by A1:2005 and A2:2006), EN 301 489-03
V1.4.1:2002, EN 301 489-01 V1.8.1:2008, EN 302 291-2 V1.1.1:2005, RSS-Gen:2010,
FCC 15.225:2011, ANSI C63.10:2009, IEC 60950-1:2005 (2nd Edition) and/or EN
60950-1:2006.
Printer or Battery Disposal/Recycle
Information for EU-member states only - The following symbol of a crossed-out
wheeled bin indicates that the Toro printer and battery must be disposed of properly and
not treated as general waste. Incorrect disposal could have a negative impact on human
health and the environment. For more information on the correct disposal/recycling of
this printer or battery, please contact Graphic Products at 800.788.5572.