20 | 8.3 Battery Maintenance
DuraLabel.com | 800.788.5572
TROUBLESHOOTING
There is a red “X” over the supply icon on the Toro main
screen toolbar.
Either no label stock is loaded, or Toro is having trouble detecting the label stock. If you
have label stock loaded and need to print, click on the printer icon in the Toro main
screen toolbar, and click the button for “Supply Update” in the lower left corner of the
Print Settings window. Toro will attempt to re-detect the supply.
The “!” light is glowing red.
Toro is not ready to print. Usually, this is because the print head carriage is not fully
latched down; open the cover and press firmly on the textured areas at the top of the
print head carriage. The light will change to solid green when the system is ready to
print.
The “!” light is blinking red, but there is no error message on the
screen.
Toro is paused. Press the Pause/Feed button on Toro’s Control Panel; the light should
change to solid green, and any waiting labels should be printed.
To Next Page
Loading...
