DURKOPP ADLER 767 Operating Instructions

Sewing process Operation / Explanation
Transfer-seam over-sewing
- Operate knee switch.
The speed of rotation is restricted to 2 000
stitches/min.
At the e nd of the seam
Remove material
Do not raise sewing feet
Do not sew a finishing
lock-stitch
- Pull pedal fully back and hold it there.
The finishing lock-stitch is sewn.
The thread is cut off.
The machine halts in the 2nd position.
The needle is up (turn-back ).
The sewing feet are up.
- Briefly pull pedal fully back.
The finishing lock-stitch is sewn.
The thread is cut off.
The machine halts in the 2nd position.
The needle is up (turn-back).
The sewing feet are down.
- Pres key 3 and pull pedal fully back.
The finishing lock-stitch is not sewn.
The thread is cut off.
The machine halts in the 2nd position.
The needle is up (turn-back).
The sewing feet are up or down depending on
the pedal position.
28

DURKOPP ADLER 767 Specifications

General

Brand	DURKOPP ADLER
Model	767
Category	Sewing Machine
Language	English