DURKOPP ADLER 867 Additional Instructions

Assembling the remaining thread monitor
Additional Instructions 867/867-M PREMIUM - 00.0 - 07/2018 13
5. Turn the hook until the light beam hits the reflective surface on the
bobbin.
 The LED (6) lights up for 1 second with each reflection in the setting
mode.
The output to the control and the auxiliary output are switched on.
6. Turn potentiometer (5) or (7) counterclockwise to reduce the sensitivity
until the reflection can just be detected.
When sewing begins, the system leaves setting mode automatically.

DURKOPP ADLER 867 Specifications

General

Stitch Type	Lockstitch
Max Stitch Length	12 mm
Needle System	134-35
Needle Thread Tension	Adjustable
Lubrication	Automatic
Type	Industrial Sewing Machine
Max Sewing Speed	3000 stitches per minute
Presser Foot Lift	20 mm
Power Requirements	230V/50Hz