21
The normal metering zone parameters are:
Normal Zone Mode—The dimension of the normal metering zone (a preset value
or Custom).
Normal Zone Custom—The X Y W H coordinates of the custom normal metering
zone.
The backlight metering zone parameters are:
Backlight Zone Mode—The dimension of the backlight metering zone (a preset
value or Custom).
Backlight Zone Custom—The X Y W H coordinates of the custom backlight
metering zone.
VSIP
You can set the following parameters related to the VSIP communication protocol:
VSIP Port—The port used by the device to communicate with the camera. The
default value of all DVTel VSIP units is
5510.
Note: VSIP ports 9541, 65500, and those under 1024 are reserved and should not be used, not even
for serial port, video, or audio communication. The maximum value is 65535.
To Next Page
Loading...
