26
The 9540 IP Camera is programmed at the factory with the following configuration:
Type Configuration
Access management User accounts: Disabled
Telnet sessions: Enabled
IP firmware update: Enabled
Global security profile: Disabled
SSL passkey: <empty>
Network DHCP configuration: Disabled
IP address: 169.254.*.* (MAC address of the
camera)
Subnet mask: 255.255.0.0
Gateway: 169.254.*.* (MAC address of the camera)
Video settings (North
America)
Target frame rate: 30 fps
Target bit rate: 800 kbps
Resolution: CIF (352 x 240)
Maximum quantizer: 10
Video standard: NTSC
Video settings
(Europe)
Target frame rate: 25 fps
Target bit rate: 800 kbps
Resolution: CIF (352 x 288)
Maximum quantizer: 10
Video standard: PAL
VSIP VSIP Port: 5510
VSIP Multicast IP Address: 224.16.32.1
VSIP Discovery IP Address: 255.255.255.255
To Next Page
Loading...
