2.5 Before you start
Before you start using the video camera, some basic settings such as
date and time, languages and beep function need to be configured.
2.5.1 Setting the date and time
4. Turn on the video camera, and switch the mode button to
Setup. Press up/ down on the Navigation pad to
highlight Date / Time. Press the Shutter button to
confirm.
5. Press up/ down on the Navigation pad to highlight each
field and press the Shutter button to select a field.
6. Adjust each value by pressing up or down on the
Navigation pad. Press the Shutter button to save your
changes.
15
To Next Page
Loading...
Need help?
General
