4.5.7 Date/time
See section 2.5.1 “Setting the date and time”.
4.5.8 Beep
See section 2.5.3 “Setting the beep”.
4.5.9 Memory status
This function provides information on the memory status and the
number of saved files.
1. Turn on the video camera and switch to the SET mode.
2. Use the joystick to highlight the Memory Status option.
Press the joystick inwards to enter the submenu.
3. The number of saved files and the free memory space are
displayed on the screen. Press the joystick inwards to
exit.
To Next Page
Loading...
Need help?
General
