Dyna-Glo DGSS1382VCS - Assembly Instructions - Firebox & Support; Attaching Offset Firebox to Smoker; Offset Support Bracket Installation

10
ASSEMBLY INSTRUCTIONS
9. CAUTION: This unit is HEAVY! Do not
attempt to stand the unit upright without
assistance!
Attach the offset rebox to the smoker body (A)
using four M6 x 12 bolts (BB).
10. Attach the preinstalled offset support bracket
on the left leg assembly (I) to the bottom section
of the offset (U) using two M6 x 12 bolts (BB) and
two M6 nuts (DD).
BB
I
10
A
BB
9
Hardware Used
BB
M6 x 12mm
Bolt
x 4
DD
U
Hardware Used
BB
M6 x 12mm
Bolt
x 2
DD
M6 Nut
x 2