Dynapac LH700 - Machine Operation and Controls; Throttle and Vibration Engagement; Direction and Speed Control with Lever; Emergency Stop Activation

17LH700 ILH700EN1
2
OPERATION
1. Open throttle fully.
During compaction work the engine must
always run at full throttle.
Operating
2. Pull out the emergency knob (vibration ON).
Drive direction and speed are infinetely variable with
the hydraulic lever.
3. Forward (slowly move the hydraulic lever forward).
4. Reverse (slowly move the hydraulic lever back-
wards).
5. Stationary (slowly move the hydraulic lever in the
opposite direction until the machine stops).
In an emergency—press the emergency
knob.
1
3
4
5
L000643
L000644
L000441
CAUTION
WARNING