Dynapac LH700 - 10-Hour Maintenance Procedures; Engine Oil and Air Cleaner Checks; Fastener Tightening and Machine Cleaning

21LH700 ILH700EN1
1. Check oil level in engine crankcase.
2. Check air cleaner.
We recommend reading the detailed engine instructions
supplied with the machine.
2
1
MAINTENANCE – EVERY 10 HOURS OF OPERATION
3. Check and, where necessary, tighten screws and
nuts.
1. Oil dipstick
2. Air cleaner
L000466
L000028
L000467
4. Keep machine clean.
When washing the machine, do not aim a jet of
water jet directly at the fuel cap. This is especially
important when using a high-pressure jet. Put a
plastic bag over the filler cap of the fuel tank and
secure with an elastic band.
CAUTION