Dynapac LH700 - 100-Hour Maintenance Procedures; Engine Oil and Filter Change; Lubricating Controls and Hydraulic Fluid Check

22 LH700 ILH700EN1
MAINTENANCE – EVERY 100 HOURS OF OPERATION
1. Change oil (first change after 20 hours, together
with engine oil filter).
Volume: 1.9 lit. (2.0 qts) SAE 15W/40
Use the accompanying hose to drain the oil.
1
3
2. Lubricate controls.
1. Oil dipstick
2. Oil filter
3. Oil drain plug/drain hose
3. Check fluid level (1) in hydraulic reservoir.
Volume: 28.0 lit. (7.4 gal) Shell Tellus TX68
Biodegradable oil: Shell Naturelle HF-E46
2
1
1. Sight glass
Save the oil and dispose of it in an approved
manner.
L000468
L000469