Dynapac LP8500 - 250-hour and 1000-hour maintenance schedules

27
LP8500 ILP8500EN1
Item in fig. Maintenance see page Comments
6 Replace the Engine Oil Filter 29
1 Drain and refill Engine Oil 29
11 Check and clean the 29
engine cooling air system
11 Check and set the engines tappet clearance See engine manual
7 Replace the Hydraulic Filter 29
8 Replace the Fuel Filter 30
12 Drain Fuel Filter (dewateringfilter) 30
9 Replace the Air Filter 30
10 Check that the battery terminals
are clean and tight 31
Check the engine spacer bolts 31
Item in fig. Maintenance see page Comments
2 Change the Hydraulic Oil 32
7 Change Hydraulic Filter 29
Every 1000 Hours
MAINTENANCE – SERVICE POINTS
Every 250 Hours