4
LP8500 ILP8500EN1
SAFETY INSTRUCTIONS (FOR ALL LIGHT PRODUCTS)
CAUTION
Symbols
The signal words WARNING and CAUTION
used in the safety instructions have the follow-
ing meanings:
WARNING: Indicates danger or
hazardous procedure that could
lead to serious or mortal injury if
the warning is neglected.
CAUTION: Indicates danger or haz-
ardous procedure that could lead to
machine or property damage if the
warning is neglected.
Important rules for your safety
The machine must not be modified
without the prior consent of the man-
ufacturer. Use only original parts.
Use only the accessories recom-
mended by Dynapac. If modifications
not approved by Dynapac are carried
out, these could result in serious in-
jury to yourself or other personnel.
• These recommendations are based on
international safety standards.
• You must also observe any local safety
regulations which may be in force. Read all
instructions carefully before operating the
machine. Keep the instructions in a safe place.
• Signs and stickers giving important information
about safety and maintenance are supplied
with every machine. Make sure that they are
always legible. The ordering numbers for new
stickers can be found in the spare parts list.
• Use of the machine and its accessories is
restricted to the applications specified in the
product literature.
• For reasons of product safety, the machine
must not be modified in any way.
• Replace damaged parts immediately.
Replace all wear parts in good time.
Be alert
Always pay attention to what you are doing, and
use your common sense. Do not use the ma-
chine if you are tired or under the influence of
drugs, alcohol or other substances which can
effect your vision, reaction ability or judgement.
Safety equipment
Long exposure to loud noise without
ear protectors can cause permanent
damage to hearing.
Long exposure to vibrations can dam-
age the hands, fingers and wrists. Do
not use the machine if you experience
discomfort, cramp or pain. Consult a
doctor before resuming work with
the machine.
Always use approved safety equipment. The
operator, and people in the immediate vicinity of
the working area, must wear:
• Safety helmet
• Safety goggles
• Ear protectors
•
Dust mask in dusty environments
•
High-visibility clothing
• Protective gloves
• Protective shoes
Avoid wearing loosely fitting clothing that might
get caught in the machine. If you have long hair,
cover it with a hair net. Vibrations from hand-held
machines are transmitted into the hands via the
handles of the machine. Dynapac machines
feature a handle design that absorbs a large part
of the machine vibrations. The vibrations are not
eliminated entirely, but it is possible to use the
machines for longer periods of time without the
risk of injury.
Be alert to acoustic signals from other ma-
chines in the working area.
Working area
Do not use the machine near flammable material
or in explosive environments. Sparks can be
emitted from the exhaust pipe, and these can
ignite flammable material. When you take a pause
or have finished working with the machine, do not
park it on or near flammable materials. The ex-
haust pipe can get very hot during operation, and
can cause certain material to ignite. Make sure
that there are no other personnel inside the work-
ing area while the machine is in use. Keep the
worksite clean and free of extraneous objects.
Store the machine in a safe place, out of unauthor-
ized’s reach, preferably in a locked container.
WARNING
WARNING
WARNING
WARNING
To Next Page
Loading...
Need help?
General