F 52 6
1.2 Points of maintenance
Engine fuel tank (1)
- Check the filling level on the gauge
on the operating panel.
A
Fill the fuel tank each time before start-
ing work so that the fuel system cannot
"run dry" and time-consuming venting
(bleeding) can therefore be avoided.
m
Observe the instructions for fuel recom-
mendations and the specification in the chapter on "Lubricants and operating sub-
stances"!
For filling in the fuel:
- Unscrew cap (A).
- Fill in fuel through the filling port until
the required fill lever is achieved.
- Replace the cap (A).
Clean the tank and system:
- Unscrew the drain plug (B) at the bot-
tom of the tank and drain into a collec-
tion pan about 1 l fuel.
- When returning the screw, make sure
to use a new seal.
To Next Page
Loading...
