B 16
5.12 Material compartment (hopper)
5.13 Material transfer
5.14 Material distribution SD2550C
5.15 Material distribution SD2550CS
Volume
Approx. 8.0 m
3
= approx. 17.5 t
Minimum inlet height, centre 525 mm
Minimum inlet height, outside 530 mm
Hopper width, outside, open 3610
Type Dual conveyor belt
Width 2 x 655 mm
Conveyors Left and right auger separately controllable
Drive Hydrostatic, continuously controllable
Conveying volume controller Fully automatic via configurable switching points
Auger diameter 430 mm
Drive
Hydrostatic central drive, continuously controlla-
ble independently of the conveyor
Auger halves can be switched to opposite direc-
tions
Reversible direction of rotation
Conveying volume controller Fully automatic via configurable switching points
Auger height adjustment - Mechanically
Auger extension With extension parts (see auger extension chart)
Auger diameter 500 mm
Drive
Hydrostatic central drive, continuously controlla-
ble independently of the conveyor
Auger halves can be switched to opposite direc-
tions
Reversible direction of rotation
Conveying volume controller Fully automatic via configurable switching points
Auger height adjustment - Mechanically
Auger extension With extension parts (see auger extension chart)
To Next Page
Loading...
