Dynascan DS551LT7 User Manual

DS551LT7 User Manual 17
Operating Instructions
Powering On/Off the Display
To turn on/off the display, press the power switch on the back of the display as shown in the diagram below.
Using the Remote Control
When using the remote control, aim the remote at the IR receiver on the display. The IR receiver on the DS551LT7
model is at the back of the display with a receiving angle of 100 degrees. The IR receiver configurations of the
model are shown in the figure below.
The operating range of the remote control is 2.5 meters (8 feet).
Ambient light may affect the performance of the remote control. Avoid fluorescent or neon lights in the vicinity.
NOTE: the remote control only works when the main switch
is in the ON position.
OFF
ON

Dynascan DS551LT7 Specifications

General

Brand	Dynascan
Model	DS551LT7
Category	Monitor
Language	English