Basic Controls
Metronome
16
Metronome
Metronome provides clicks over a steady beat to help the player keep in time while playing.
Turning Metronome On/Off
☞ Keep a DATA button pressed to quickly run through the values.
☞ Pressing both DATA buttons simultaneously will restore the default tempo (120).
☞ Refer to page 25 for adjusting the metronome volume.
Press METRONOME to begin hearing metronome beats.
Press METRONOME again to turn off the metronome.
Default Tempo
Adjusting Tempo
The range of metronome tempo is from 40 to 250 bpm (beats per minute). It may be adjusted by
using DATA buttons.
Adjusting Metronome Meter
q Press SETUP, then press METRONOME.
When SETUP button is pressed, the LED will show ‘---’, then METRONOME button is pressed, the LED will
show the meter. Press DATA buttons to adjust the metronome meter.
w Press SETUP button once again to quit setup mode.
☞ Pressing both DATA buttons simultaneously will restore the default meter (1).
☞ Range: 1~12 (Default: 1)
☞ If DATA buttons are not used for about 10 seconds, setup mode will be quitted automatically.
Default Meter
Pressing SETUP
To Next Page
Loading...
