Functions
Fixed Touch Velocity / Demo Volume / Play All Music
/ Metronome Volume / Reverb Type / Effect Type
25
F05 Fixed Touch Velocity
When the Touch parameter is set to 'Fixed', all notes played will have the same velocity regardless of how
it is played. You may also set the constant volume level that you wish to use while using Fixed Velocity.
☞ Range: 20~127 (Default: 80)
☞ Press both DATA buttons simultaneously to restore its default value (80).
☞ Refer to page 23 for using the SETUP button.
F06 Demo Volume
The volume of the Demo/Etudes music recordings may be adjusted.
☞ Range: 20 ~ 100 (Default: 65)
☞ Press both DATA buttons simultaneously to restore its default value (65).
☞ Refer to page 23 for using the SETUP button.
F07 Play All Music
With this setting ON, a Demo piece is automatically followed by the next piece in the same music group,
continuing until the end of that music group is reached.
☞ Range: ON, OFF (Default: ON)
☞ Press both DATA buttons simultaneously to restore its default value (ON).
☞ Refer to page 23 for using the SETUP button.
F08 Metronome Volume
The volume of the Metronome may be adjusted.
☞ Range: 20 ~ 100 (Default: 80)
☞ Press both DATA buttons simultaneously to restore its default value (80).
☞ Refer to page 16 for Metronome settings.
☞ Refer to page 23 for using the SETUP button.
F09 Reverb Type
You may choose from the 5 available Reverb types.
☞ Press both DATA buttons simultaneously to restore its default value (r-2).
☞ Refer to page 23 for using the SETUP button.
Display r-0 r-1 r-2(default) r-3 r-4 r-5
Type off Room 1 Room 2 Hall Plate Pan Delay
F10 Effect Type
You may choose from the 3 available Effect types.
☞ Press both DATA buttons simultaneously to restore its default value (C-0).
☞ Refer to page 23 for using the SETUP button.
Display C-0(default) C-1 C-2 C-3
Type off Chorus1 Chorus2 Short Flanger
To Next Page
Loading...
