Dynaudio Sub 3 User Manual

This is
Sub3
6 Introduction
8 Important safety instructions
10 About this manual
12 Unpacking
14 Controls and connections
16 Operation
16 Connecting the subwoofer
18 Connecting a single subwoofer
19 Multiple subwoofer connections
20 Connecting loudspeakers
21 Switching the subwoofer on/off
22 Adjusting the volume (GAIN)
23 Selecting the subwoofer cut-off frequency
(SUB Lowpass)
24 Setting the phase (Phase)
25 Setting the satellite cut-off frequency
(Highpass)
26 Positioning the subwoofer
27 Impact of room-modes
28 Positioning possibilities
29 Using multiple subwoofers
30 General tips
32 Volume (GAIN)
32 Cut-off frequencies
34 Control possibilities
35 General tips
36 Specic tips
38 Troubleshooting
40 Care and maintenance
42 Warranty
43 Technical specications

Dynaudio Sub 3 Specifications

General

On/off switch	Yes
Product color	Black
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Subwoofer type	Active subwoofer
Number of subwoofers	1
Subwoofer peak power	300 W
Subwoofer driver diameter	240 mm
Subwoofer frequency range	22 - 175 Hz
Subwoofer crossover frequencies	60 - 80 Hz
Line inputs (RCA)	3

Weight and Dimensions

Subwoofer depth	320 mm
Subwoofer width	266 mm
Subwoofer height	276 mm
Subwoofer weight	10500 g