EasyManua.ls Logo

DynaVox MT4 - Carrying Your Device; Transporting Your Device; Device Care and Handling

DynaVox MT4
97 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Quick Start: Introducing DynaVox Series 4
Part # 400023
9
4. Plug the charger jack into the charger port on the right side of your device.
The amber LED to the right of the touch screen will light up while the device is charging. The light will go
out when the battery is fully charged. You can use the device while it is charging.
Caution: Because batteries use a chemical reaction, battery performance will deteriorate over time
even if stored for a long period of time without being used. In addition, if the various usage
conditions such as charge, discharge, ambient temperature, etc. are not maintained within
the specific ranges, the life expectancy of the battery may be shortened or the device in
which the battery is being used may be damaged by electrolyte leakage. If the battery
cannot maintain a charge for long periods of time, even when it is charged correctly, this
may indicate that it is time to change the battery.
Carrying Your Device
Your DV4/MT4 was shipped with a short handle strap and a long shoulder strap. Both Series 4 devices offer
two sets of strap attachment points (see Figure 2 on page 5). To attach a strap to the device, follow
these steps:
1. Remove the small split rings from the clips at the ends of the carrying strap.
2. Choose two strap attachment points and thread a split ring onto each one.
3. Clip each end of the carrying strap to a split ring at the strap attachment points.
Transporting Your Device
If you use your DV4/MT4 device while in a wheelchair, you should have it properly mounted for both
communication and transportation purposes. Wheelchair mounting systems are available through DynaVox
Technologies.
A protective carrying case is also available for transporting your device and its accessories. Consult the
DynaVox website at www.dynavoxtech.com or your DynaVox Technologies sales consultant for more
information.
Device Care and Handling
To clean your DV4/MT4, first turn the unit off and then wipe it gently with a damp cloth or soft paper
towel. You may dampen the towel with a mild window cleaner to remove fingerprints, food particles and
dust.