DynaVox Technologies
82
Restoring
If you have backed up your DV4/MT4 device, information that is lost for any reason can be easily
restored. When you restore user information to a DV4/MT4 device, all of the files that are stored in the
selected backup file are copied to the device. This process will overwrite any user information that is on
the DV4/MT4 with the information in the backup file.
Restoring User Information
To restore information to your DV4/MT4 device from a backup file, follow these steps:
Note: The steps below require the use of a USB storage device (like the one that was shipped with
your DV4/MT4). You can also restore with a secondary data storage card. If you prefer to use
a storage card, please refer to the Series 4 Searchable Help for step-by-step instructions.
Note: Restoring will overwrite all of the user data that is currently on your device and replace it
with the user data that is stored in the selected backup file.
Note: Before beginning the steps below, load the backup (.bck) file that you will restore to your
DV4/MT4 onto your USB storage device.
1. Plug the USB device into the USB host port on your Series 4 device.
2. Select the pull-down menu button in the title bar at the top of the touch screen.
3. Select Setup in the main pull-down menu.
4. Select Setup Menu in the second pull-down menu. The Setup menu will open.
5. Select the Backup/Upgrade button. The Backup Upgrade menu will open.
6. Select the DynaVox Restore button.
7. Select the OK button to confirm that you want to proceed with the restore process. The
Select File menu will open.
8. Select the UMS_FOLDER directory in the left viewport.
Note: If the UMS_Folder directory is not shown, select the Show All Directories check box.
9. In the right viewport, select the name of the backup (.bck) file you want to use.
10. Select the OK button. A window will open to note that the restoration is in progress. The
process of restoring may take several minutes.
To Next Page
Loading...