Quick Start: Introducing DynaVox Series 4
Part # 400023
81
Creating a Copy of the User Files Folder
To supplement the backup by storing a copy of the User Files folder on a Windows computer, follow these
steps:
Note: The steps below require the use of a USB storage device (like the one that was shipped with
your DV4/MT4). You can also store a copy of the User Files folder on a secondary data storage
card. If you prefer to use a storage card, please refer to the Series 4 Searchable Help for
step-by-step instructions.
1. Plug the USB device into the USB host port on your DV4/MT4 device.
2. Select the pull-down menu button in the title bar at the top of the touch screen.
3. Select Setup in the main pull-down menu.
4. Select Tools Menu in the second pull-down menu. The Tools menu will open.
5. Select the File Browser button. The File Browser menu will open.
6. In the left viewport, select the Storage Card folder.
7. In the right viewport, select the check box beside the User Files folder.
8. Select the Edit Operations button. The Edit Operations menu will open.
9. Select the Copy button. The Edit Operations menu will close automatically.
10. In the left viewport of the File Browser menu, select the UMS_FOLDER folder.
11. Select the Edit Operations button. The Edit Operations menu will open again.
12. Select the Paste button. A copy of the folder will be added to the USB storage device.
13. Select the OK button to close the File Browser menu.
14. Select the OK button to close the Tools menu.
Once you have successfully added a copy of the User Files folder to your USB storage device, you can
either store the backup file on the USB storage device or use the USB storage device to add the file to a
Macintosh or Windows computer.
To Next Page
Loading...