Quick Start: Introducing DynaVox Series 4
Part # 400023
83
11. When the restore process is complete, select the OK button to reboot your device. The touch
screen will go dark and the device will begin the reset process. Splash screens for Windows CE
and DynaVox Series 4 may be presented for a few moments. Do not make any selections on
these screens. After a few minutes, your device will automatically restart.
The information in the backup file has been restored to your device.
Importing a Copy of the User Files Folder
If your custom image, MP3, song or sound files are no longer on your device after a restore process, you
may need to import a saved copy of the User Files folder. To do this, follow these steps:
Note: The steps below require the use of a USB storage device (like the one that was shipped with
your DV4/MT4). If your copy of the User Files folder is on a secondary data storage card,
please refer to the Series 4 Searchable Help for step-by-step instructions.
Note: Before beginning the steps below, load the copy of the User Files folder copy onto your USB
storage device.
1. Plug the USB storage device in the USB host port on your DV4/MT4 device.
2. Select the pull-down menu button in the title bar at the top of the touch screen.
3. Select Setup in the main pull-down menu.
4. Select Tools Menu in the second pull-down menu. The Tools menu will open.
5. Select the File Browser button. The File Browser menu will open.
6. In the left viewport, select the UMS_FOLDER folder.
7. In the right viewport, select the check box beside the User Files folder.
8. Select the Edit Operations button. The Edit Operations menu will open.
9. Select the Copy button. The Edit Operations menu will close automatically.
10. In the left viewport of the File Browser menu, select the Storage Card folder.
11. Select the Edit Operations button. The Edit Operations menu will open again.
12. Select the Paste button. A copy of the User Files folder will be added to the storage card.
13. Select the Yes button to confirm that you want to overwrite the user files. All the files in the
backup copy of the User Files folder will be sent to the User Files folder on the device.
To Next Page
Loading...