DynaVox Technologies
20
2. Select Setup in the main pull-down menu.
3. Select Setup Menu in the second pull-down menu. The Setup menu will open.
4. Select the Selection Method pull-down menu.
5. Select the Morse code option.
6. Select the OK button to close the Setup menu.
Mouse Pause
The mouse pause selection method is an excellent direct select option for an individual who has the
physical ability to maneuver a mouse to direct a cursor on the DynaVox touch screen, but who lacks the
ability to press down on the mouse button to make selections. When the mouse pause selection method is
active, moving a computer mouse or track ball connected to the DynaVox device will control a cursor on
the touch screen. An item will be selected when the cursor pauses on it for a specified amount of time.
Follow these steps to activate the mouse pause selection method:
1. Select the pull-down menu button in the title bar at the top of the touch screen.
2. Select Setup in the main pull-down menu.
3. Select Setup Menu in the second pull-down menu. The Setup menu will open.
4. Select the Selection Method pull-down menu.
5. Select the Mouse Pause option.
6. Select the OK button to close the Setup menu.
To Next Page
Loading...