DynaVox Technologies
44
Text Color - Select the Text Color button to open a Color Selector menu that can be used to
select a new color for the text in the button’s label. The Text Color button will always display the
color that is currently selected for the label text.
Label Font - Select the Label Font button to open a Select Font menu that can be used to
customize the font in the button’s label. The Label Font button always displays the current
settings.
Scannable - Use the Scannable check box to indicate whether a button should be included in the
scan pattern.
OK/Cancel - Select the OK button to accept new settings and close the Modify Button menu.
Select the Cancel button to close the menu without accepting any new settings.
Modify Button Menu Steps
To customize a button with the Modify Button menu, follow these steps:
1. Select the green Modify button in the title bar at the top of the touch screen. Once selected,
the button will turn red.
2. Select the button you want to edit. The Modify Button menu will open.
3. To change the button type, select the Button Type pull-down menu and then select one of
the available options. The pull-down menu will close and display the chosen type.
4. To change the button label, select the Label text box (a system keyboard popup will open)
and then complete the rest of this step:
4a. Use the system keyboard to enter the new label text.
4b. Select the OK button to close the system keyboard popup. The new label will appear in
the Label text box in the Modify Button menu.
4c. If the button already has a symbol, it will not be changed. Continue with step 5.
If the button does not have a symbol and the label you entered is not associated with a
symbol, no symbol will be added to the button. Continue with step 5.
If the button does not have a symbol and the label has one associated symbol, the symbol
will automatically be added to the button. The symbol will be displayed beside the
Symbol button in the Modify Button menu. Continue with step 5.
If the button does not have a symbol and the label has more than one associated symbol,
the Select a Symbol menu will open. Select the symbol you want to use and then select
To Next Page
Loading...