DynaVox Technologies
54
Note: A picture that will be used as the background of a communication page must be
stored in the Images folder on the device’s main data storage card. If the picture
is not stored on the device, the software will be unable to find it when the page
is opened. If you have not already imported and stored the picture you want to
use, please refer to the steps for Importing a Digital Picture in the DynaVox
Series 4 Searchable Help on the CD that came with your DV4/MT4.
6a. In the right viewport of the Select a Picture File menu, select the name of the picture
file you want to use.
6b. Select the OK button to close the Select a Picture File menu. In the Modify Pages
menu, the name of the file you selected will now be displayed in the Images button.
If you choose a new image in this menu, the Background check box will be automatically
selected.
7. If you want to use the Autofit feature to enlarge the symbols until they completely fill the
symbol properties, select the Autofit Buttons check box.
8. If you want to replace the existing symbols with symbols from a different symbol set, select
the Symbol Type pull-down menu and then choose one of the available options: DynaSyms
Classic, DynaSyms, PCS (if available), System Symbols or None.
9. If you want to modify the location of the labels within the buttons, select the Label Location
pull-down menu and then select one of the available locations: To p and Bottom.
10. Most buttons have a vocabulary that either speaks vocabulary or inserts it into the Message
Window. If you want to modify this behavior in the buttons on your selected pages, select the
Change Behaviors From pull-down menu and then select one of the two available options.
Insert to Speak
Select this option if you want to change all Insert Text and Insert Label behaviors to Speak
Text and Speak Label behaviors.
Speak to Insert
Select this option if you want to change all Speak Text and Speak Label behaviors to Insert
Text and Insert Label behaviors.
11. Select the OK button to close the Modify Pages menu.
12. Select the Yes button to confirm that you want to permanently modify the selected pages.
13. Select the OK button to close the Page Browser menu.
14. Select the OK button to close the Tools menu.
To Next Page
Loading...