DynaVox Technologies
86
1. Plug the USB device into the USB host port on your DV4/MT4 device.
2. Select the pull-down menu button in the title bar at the top of the touch screen.
3. Select Setup in the main pull-down menu.
4. Select Setup Menu in the second pull-down menu. The Setup menu will open.
5. Select the Backup/Upgrade button. The Backup Upgrade menu will open.
6. Select the DynaVox Upgrade button.
7. A confirmation box will open. Select the OK button to continue with the upgrade process.
The Select File menu will open.
8. Select the UMS_Folder directory in the left viewport.
Note: If the UMS_Folder directory is not shown, select the Show All Directories check box.
9. In the right viewport, select the name of the upgrade (.upg) file you want to use.
10. Select the OK button. A window will open to note that the upgrade is in progress.
11. When the upgrade is complete, a window will open to ask you if you want to reboot your
device to complete the upgrade process. Select the OK button. The touch screen will go dark
and the device will begin the reset process. Splash screens for Windows CEand DynaVox
Series 4 may be presented for a few moments. Do not make any selections on these
screens. After a few minutes, your device will automatically restart.
Your DynaVox Series 4 software is now upgraded to the latest version.
To Next Page
Loading...