To Next PageTo Next Page
Need help?Do you have a question about the E-Tech S06-HAE and is the answer not in the manual?
Key instructions and reminders before operating the machine.
Guidance for owners and operators on safe machine usage and compliance.
Contact details for Zhejiang Dingli Machinery Co., Ltd.
Explains severe injury risks and the meaning of safety decals.
Details conditions for use, intended use, sign maintenance, electrocution and tip-over hazards.
Advises on operating on slopes, fall protection, and collision awareness.
Identifies and labels the various components of the scissor lift.
Instructions to verify legibility and placement of all decals on the machine.
Details technical specifications for the S06-HAE model.
Details technical specifications for the S0608-HAE model.
Details technical specifications for the S0808-HAE model.
Details technical specifications for the S0812-HAE model.
Details technical specifications for the S1012-HAE model.
Details technical specifications for the S1212-HAE model.
Details technical specifications for the S1412-HAE model.
Details technical specifications for the S06-ACE model.
Details technical specifications for the S0608-ACE model.
Details technical specifications for the S0808-ACE model.
Details technical specifications for the S0812-ACE model.
Details technical specifications for the S1012-ACE model.
Details technical specifications for the S1212-ACE model.
Details technical specifications for the S1412-ACE model.
Describes the layout and functions of the ground-level control panel.
Describes the layout and functions of the platform-level control panel.
Explains the operator's responsibility for pre-operation inspection and routine maintenance.
Explains the purpose of function tests to identify machine malfunctions before use.
Instructions for activating Emergency Stop and manual platform lowering.
Steps for preparing and operating the machine from ground and platform controls.
Instructions for steering and driving the machine using platform controls.
Guidance on drive speed selection and operating on slopes.
Instructions for using safety arm, guardrails, and anti-collision systems.
Lists fault codes, their descriptions, and the machine's reaction to each error.
General guidelines for proper machine storage and rust prevention.
Detailed instructions for storing lead-acid and lithium batteries properly.
Essential safety guidelines for transport and procedures for brake release.
Steps for safely securing the machine onto a transport vehicle.
Step-by-step guide for safely lifting the machine using a forklift.
Guidance on lifting procedures and center of gravity data for various models.
Key rules regarding operator maintenance tasks and technician responsibilities.
Explanation of symbols and overview of inspection frequencies and requirements.
Templates for pre-delivery inspections and maintenance reports.
Verify manual/decal legibility and perform pre-operation inspection.
Procedures for checking battery condition and hydraulic oil level.
Guide to testing machine functions and initial 30-day maintenance.
Procedures for inspecting battery condition and electrical wiring integrity.
Procedures to test the functionality of emergency stop buttons and the key switch.
Procedures to test the horn and the machine's drive brakes.
Procedure to test the machine's drive speed when the platform is stowed.
Procedures to test drive speed when raised and in slow mode.
Procedures for hydraulic oil analysis and inspecting the tank venting system.
Tests for module tray latches, pothole limit switches, and level sensor.
Procedure to test the platform overload system for proper function and calibration.
Procedure for replacing the hydraulic tank breather cap.
Procedure to measure and inspect scissor arm wear pads for wear.
Procedure for replacing the hydraulic tank return filter element.
Steps for testing or replacing the machine's hydraulic oil.
Hydraulic schematic diagram for the S06-HAE model.
Hydraulic schematic diagrams for S0608, S0808, and S0812 HAE models.
Hydraulic schematic diagrams for S1012, S1212, and S1412 HAE models.
Hydraulic schematic diagram for the S06-ACE model.
Hydraulic schematic diagrams for S0608, S0808, and S0812 ACE models.
Hydraulic schematic diagrams for S1012, S1212, and S1412 ACE models.
Electrical schematic for S06-HAE with lead-acid battery configuration.
Electrical schematics for S0608-S1412 HAE with lead-acid batteries.
Electrical schematic for S06-HAE with lithium battery configuration.
Electrical schematics for S0608-S1412 HAE with lithium batteries.
Electrical schematic for S06-ACE with lithium battery configuration.
Electrical schematics for S0608-S1412 ACE with lithium batteries.
General| Brand | E-Tech |
|---|---|
| Model | S06-HAE |
| Category | Scissor Lifts |
| Language | English |
