Eagle CUDA 350 S/MAP - Selecting any Map Item with the Cursor; Set a Waypoint

101
Selecting Any Map Item With the Cursor
1. Use the zoom keys and the arrow keys to move around the map an
d
find the item you wish to select.
2. Use the arrow keys and center the cursor crosshairs on the desired ob-
j
ect. On most items, a pop-up box will give the name of the selected item.
Set a Waypoint
A
waypoint is an electronic address, based on the latitude and longi-
tude of a position on the earth. A waypoint represents a location, spot
or destination that can be stored in memory, then recalled later fo
r
navigation purposes.
Y
ou can create a waypoint at the cursor position on the map or at you
r
current position while you are navigating. You can create a waypoint at
any location by manually entering the position's latitude and longitude.
To create and save a Waypoint:
These first two techniques use the Quick Save method, the fastest an
d
easiest way to create a waypoint.
Create Waypoint at Current Position
While you are traveling, press WPT|WPT. The waypoint is saved an
d
automatically given a name with a sequential number, such as "way-
point 003." The waypoint symbol and number appear on the map.