WHILE OPERATING THE MACHINE, OPERATORS MUST REFRAIN FROM
WEARING CLOTHING OR ACCESSORIES THAT MAY GET CAUGHT IN THE
MOVING PARTS OF THE MACHINE
(WATCHES, RINGS, BRACELETS, TIES, LOOSE CLOTHING, ETC…)
This manual covers safety precautions, parameters, machine operation, maintenance, and troubleshooting
information.
Prior to setting up the machine
1. Verify the model number matches the model number addressed in this manual.
2. Verify that no parts of the machine have been removed or are missing.
3. Remove all packaging or shipping materials used during transport or storage of the machine.
4. Check for any damage that may have occurred during shipping or transport.
Prior to operating the Eagle T20CF, verify
• Verify power supply voltage matches the requirements of the machine.
• Protective shielding and covers are properly installed
• Machine is on stable ground and casters are in the locked position.
The Eagle T20CF is designed to automatically shut down if the control panel is opened while the machine is in
operation.
To Next Page
Loading...
