Functions of remote transmitters
The remote transmitters integrated with the security system use the most perfect and
reliable radio frequency transfer as opposed to all car security systems being sold at the
moment. Some of modern skilled car hijackers use the devices known as code grabbers
allowing to accept and keep a signal transferred by the remote control of the car security
system. As soon as the driver is out the code is used by the hijacker to disarm the system.
Unlike the remote controls described above the remote transmitters integrated with your
security system change the code of the transferred signal each time when the button is
pressed, therefore, when a hijacker reproduces the signal grabbed from your remote
transmitter, the security system just will not react.
Functions of remotetransmitter buttons
Button to arm the system (ARM)
Button to disarm the system (DISARM)
Button to control remote engine start
Button to control Trunk open / CH-1 active
Button to check car status , to turn on LCD back light
Fig.1
2-way remote #TR-45
1-way remote #TX-4R
To Next Page
Loading...
