Programming 2-Way remote
Battery conserve mode
The mode can be turned on/off 2-way receiving in the Disarmed mode if you simultaneously
press down the buttons until the zzz icon turn on. Being in the Disarmed mode
the remote pager turns off its receiver in 30sec.
To exit the mode, simply press the buttons until zzzz icon turn off.
2way remote button lock ON/OFF
For safety purpose, this 2-way remote can be lockout the remote button in order not to
mis-touched the buttons. Press button for over 2sec. until one beep is heard,
remote button is now locked. To turn on remote button, press button for over
2sec. until two beeps is heard, remote button is now unlocked.
2-way LCD display :
2-way LCD display :
Beeps
2-way remote feature
Vibrations
1-beep
1-beep
1-time
1-time
Remote with tone and vibration
Remote with vibration only
Remote with tone only
Vibrate mode on/off
Press button for over 2sec. the 2-way remote will respond tone & vibrate feature,
the button pressing 2sec. will change the feature, see under table:
To Next Page
Loading...
