EasyIO SH-TSX - Page 2

SH-TSX Product Manual - © EasyIO / www.easyio.eu
2
Document Change Log
15
th
Feb 2018 (V1.0)
Document created
14
th
Nov 2018 (V2.0)
Updated document corresponding firmware v3.
14
th
Dec 2018 (V2.1)
Added DI110 and BI4; these show if the fan speed has been set to Manual or Auto by user. (firmware
version 3.06).
4
th
Jul 2019 (V2.2)
Added Setpoint Mode “None” where no Setpoint is displayed.
System Setting “Screen Refresh Rate added. This can be used in cases when noise on power supply
affects the display. Decreasing the refresh rate will slow down the speed that the screen is redrawn.
(firmware version 3.12).