EasyIO SH-TSX - Page 26

SH-TSX Product Manual - © EasyIO / www.easyio.eu
26
118
Show Temperature Unit
Selection Icon
Unsigned 16
0..1
0 = Disabled (default)
1 = Enabled
119
Built-In Sensor Calibration
Signed 16
-100..+100
-10.0..+10.0 °C/°F
120
RI1 Sensor Calibration
Signed 16
-100..+100
-10.0..+10.0 °C/°F
121
RI2 Sensor Calibration
Signed 16
-100..+100
-10.0..+10.0 °C/°F
122
Humidity Sensor Calibration
Signed 16
-100..+100
-10.0..+10.0 %rH
123
Humidity Display
Unsigned 16
0..1
0 = Disabled
1 = Enabled (default)
124
Override Mode Icon
Note: To release override set to
None, otherwise the user cannot
set/unset.
Unsigned 16
0..4
0 = None (Default)
1 = Auto
2 = Heating
3 = Cooling
4 = Ventilation
125
Party Mode (Boost) Time
Unsigned 16
0...480
0..480 minutes (Default
0)
0 = Disabled
126
Backlight Brightness
Unsigned 16
1..20
0..20 (default 5)
127
Relay Control Mode
Control = Controlled by the time
schedule / party mode boost
Network = Controlled by network
Unsigned 16
0..1
0 = Control N/O
(Default)
1 = Control N/C
2 = Network
128
Lock Mode Password
Unsigned 16
0..9999
0000...9999
129
Maintenance Mode Password
Unsigned 16
0..9999
0000...9999
130
Override A/C
Note: To release override set to
None, otherwise the user cannot
set/unset
Unsigned 16
0..2
0 = None (Default)
1 = Override On
2 = Override Off
131
Override Lights
Note: To release override set to
None, otherwise the user cannot
set/unset
Unsigned 16
0..2
0 = None (Default)
1 = Override On
2 = Override Off
132
Override Lock Mode
Note: The parameter returns
automatically to 0 allowing local
control
Unsigned 16
0..2
0 = None (Default)
1 = Lock Screen
2 = Cancel Lock Mode
133
Enable OFF Icon
Unsigned 16
0..1
0 = Disabled (Default)
1 = Enabled (Home
Screen)
134
Fan Speed Override (Advanced
Mode)
Unsigned 16
1..8
1 = Register 135
2 = Speed 1
3 = Speed 2
4 = Speed 3
5 = Speed 4
6 = Speed 5
7 = Speed 6
8 = Register 111
135
Night Speed – Set Fan Speed in
Night Mode
Unsigned 16
0..6
0..6
136
Relay Network Override
(Overrides the relay drive directly,
local)
Unsigned 16
0..2
0 = No Override
(Default)
1 = Override Relay On
2 = Override Relay
OFF
137
Staff Code
Unsigned 16
0..9999
0000…9999
138
Language
Unsigned 16
0..2
0 = English (Default)
1 = Finnish
2 = Swedish
139
Sensor 1 Text (RI1/Network)
Unsigned 16
0..16
0 = Disabled