Eaton 9140 - EBM Setup; Checking the EBM Accessory Kit

Eaton
®
9140 (9910-E82/E83) UPS Installation Guide for IBM
®
Applications S 164201715 Rev 2
www.eaton.com/ibm
1
Chapter 1 Installation
Parts List
IBM part numbers are subject to change without notice.
Table 1. E82 Base Configuration (44V3918)
Quantity IBM MN IBM FC IBM PN Eaton
®
PN Description
1 E82 — 44V3918
103006328-391 E82 UPS 10000 VA, 8000W North American Model
Eaton Model Number: PW9140 10000
103006328-39 Accessory Kit*:
S (4) Front Mounting Brackets
S (2) Rear Mounting Brackets
S (20) M4 Flat-Head Screws, plus (2) extra
S (1) Left Sliding Rail Assembly
S (1) Right Sliding Rail Assembly
S (4) Adapter Plates, 7.1 mm
S (4) Adapter Plates, 9.5 mm
S (16) M5 Machine Screws, plus (2) extra
S (10) M6 Machine Screws, plus (4) extra
S (6) M6 Clip Nuts for Racks with Round Holes,
plus (4) extra
S (6) M6 Cage Nuts for Racks with Square Holes,
plus (4) extra
S (8) M4 Machine Screws with (8) M4 Locknuts,
plus (2) extra of each
S (2) UPS Seismic Mounting Brackets
S (8) Wing Bolts, plus (1) extra
1 — — 44V3919 103006327-391 E82/E83 Accessory Kit
4 — — 44V3920 103006326 Battery Trays
* If the UPS is factory-installed in an IBM rack, these items are pre-assembled.