Eaton 9395XC - Page 46

28 Eaton 9395XC UPS 1200kW/1200kVA, 1350kW/1350kVA or 1500kW/1500kVA 164001079—Rev 01
supplied external wiring terminal hardware and Table 8 for external power cable terminations. Table 7 for
supplied inter-cabinet wiring terminal hardware.
The torque values listed in Table 6 for the M8 bolts are the maximum allowable. Tightening further will risk
breaking or twisting the bolt.
Figure 29 through Figure 31 show the location of the power cable terminals inside the UPS.
Table 6. UPS Internal Power Cable Terminations
Terminal Function Terminal Function
Bus Landing
Tightening Torque
Nm (lb ft)
Bolt
AC Input to UPM
Section
E1A
Phase A
4 – stud mounting
14.2 (10.4)
M8
E2A
Phase B
4 – stud mounting
14.2 (10.4)
M8
E2A Phase C
4 – stud mounting
14.2 (10.4)
M8
AC Input from ISBM
E9A
Phase A
4 – stud mounting
14.2 (10.4)
M8
E10A
Phase B
4 – stud mounting
14.2 (10.4)
M8
E11A Phase C
4 – stud mounting
14.2 (10.4)
M8
E12A
Neutral
4 – stud mounting
14.2 (10.4)
M8
DC Input to ISBM
E4A
Positive
6 – stud mounting
(2 per ISBM)
14.2 (10.4)
M8
E5A
Negative
6 – stud mounting
(2 per ISBM)
14.2 (10.4)
M8
Table 7. Supplied Inter-cabinet Wiring Terminal Hardware Kit
Part Size
Quantity
Terminals Used On
Eaton Part
Number
Flat Washer M8 40
Bypass Input, I/O AC Input to ISBM,
Battery Input,
I/O AC Output, Mounting to Brackets
180500036-080
Flat Washer M10 34
Bypass Input, I/O Battery Input,
180220042-06
Split Lock
M10 40
Bypass Input, UPM Battery Input,
UPM AC Output I/O Battery Input,
180240035-06
Hex Bolt M8 x 40mm 25
Bypass Input, Battery Input,
AC Output, Mounting to Brackets
180190078-072
Hex Bolt M10 x 25mm 40
Bypass Input, AC Input, I/O Battery Input,
AC Output
180190078-087
Hex Nut M8 9
I/O AC Input to ISBM
180200001-05
Conical Washer M8 34
I/O AC Input to ISBM, Bypass Input, AC
Output, Mounting to Brackets
180500037-080
UPS Installation Plan and Unpacking