86 Eaton 93PM UPS 480V Three-Wire – 100 kW Frame Installation and Operation Manual 164000227—Rev 07
Figure 48. UPS Control Panel
The control panel consists of:
• A color liquid crystal touch screen display (1).
• A horizontal row of status indicators (2). See paragraph 7.2.1 Status Indicators.
The following paragraphs describe using the UPS control panel to monitor the UPS. See paragraph
7.3 Single UPS Operation for use of the operational controls.
When the unit powers up, the screen displays the as shown in Figure 48.
77..22..11 SSttaattuuss IInnddiiccaattoorrss
The four symbols on the bottom of the control panel are status indicators. These colored light emitting diode
(LED) lamps work with the alarm horn to provide the operating status of the UPS.
Table 20 describes the status indicators.
UPS Operating Instructions
To Next Page
Loading...
